QR Code Generator
Type a link, text, email, phone number or Wi-Fi details. Your QR code is drawn instantly in your browser and you can download it as a PNG or a sharp SVG.
To make a QR code, enter your link or text, choose an error correction level (M is a good default, H if you will put a logo on it) and download the PNG or SVG. Keep a quiet zone of four modules around the code, use dark modules on a light background, and test-scan it with two phones before you print.
How to use the QR Code generator
- Choose what the code should do: open a link, start an email, call or text a number, or join a Wi-Fi network.
- Fill in the details. The QR code redraws as you type.
- Pick an error correction level. Use M for most uses and H if the code might get dirty or partly covered.
- Download the PNG for screens or the SVG for print, then test-scan it with at least two phones.
QR code error correction levels
| Level | Can recover about | Use it for |
|---|---|---|
| L | 7% of the code | Short links on clean screens, smallest code |
| M | 15% | Most uses (the common default) |
| Q | 25% | Printed codes that may get scuffed |
| H | 30% | Codes on packaging, outdoors, or with a small logo on top |
Recovery rates per DENSO WAVE (the inventor of QR Code) and the QR Code standard. Higher levels make the code denser, so it needs more space for the same link.
Do these QR codes expire?
No. The codes made here are static: the link or text is stored in the pattern itself, so the code works for as long as the destination exists. There is no redirect server in between and nothing to renew.
The flip side is that you cannot change the destination after printing. If you might change it, point the code at a page you control, such as your link-in-bio page, and update that page instead.
How big should a printed QR code be?
Big enough that each module (one small square) is clearly visible from the distance people will scan it. Short links make smaller, simpler codes, so shorten long URLs before you generate the code.
Always keep the quiet zone: DENSO WAVE specifies a margin four modules wide on every side. Print a test copy at the real size and scan it with a couple of different phones and camera apps before ordering a large print run.
How does this QR code generator work?
The encoder runs entirely in your browser in plain JavaScript. It stores your text in byte mode (UTF-8), picks the smallest version from 1 to 40 that fits, adds Reed–Solomon error correction, and tests all eight mask patterns to choose the one with the lowest penalty score, as the QR Code standard describes.
Nothing you type is uploaded, which also makes it safe for Wi-Fi passwords. To track scans, add UTM parameters to your link first.
Frequently asked questions
Is this QR code generator free?
Yes. It is free with no sign-up, no watermark and no scan limits, because the codes are static and do not depend on any server.
Can I use the QR code commercially?
Yes. You can print the codes on products, flyers and packaging. “QR Code” is a registered trademark of DENSO WAVE, but using QR codes is free.
Why won’t my QR code scan?
The usual causes are low contrast, a light code on a dark background, a missing margin, or a code printed too small for its amount of data. Fix those and test again.
Should I download PNG or SVG?
Use SVG for print and design tools because it scales without blurring. Use PNG for websites, slides and social posts.
Can I track how many people scan it?
Not with the code itself. Add UTM parameters to your link before you make the code, and the visits will show up in your analytics.
How much text fits in a QR code?
Up to 2,953 bytes at level L in the largest version. In practice, keep links short so the code stays small and easy to scan.